Squat Pan Toilet Mount Method Meaning

Although the installation and installation of squat pan toilets may have different meanings in different countries and cultures, here are some general installation steps.
Place the toilet bowl on the bathroom floor after removing it from the package.
Keep bathrooms as far away from your workplace as possible.
two
Place the squat toilet in the hole created.
Make sure the toilet drain pipe and the bathroom floor drain pipe are in line.

Make sure both ends of the toilet are on the floor.
Three
Connect the squat toilet drain to the drain pipe. Use the key if necessary.
four
To ensure a watertight connection, use a solvent or sealant approved for use with plumbing pipes at the junction of the sewer and toilet drain.
five
Replace the flooring pieces you removed in part 1. Fix the flooring material to the sub-surface with floor adhesive.
six
To protect your home from water intrusion, apply a waterproof sealer to the floor where the floor meets the toilet.
In conclusion, if you want to have a squat toilet at home or at work, here are two options.
You can buy and set up a squat toilet or invest in a portable squat toilet and use it.

squat pan toilet method

A squat toilet is a toilet pan that has a pit called the toilet bowl that a person squats down to use.
It also has special methods for the installation process like other types of toilets.
Some of the notable methods are as follows;
0 no
Determine the specifications of the squat toilet using a tape measure or squat toilet owner’s guide.
two
Mark the location of the toilet on the floor and focus on the presence of the toilet drain pipe.

Create a circle around the hole in the floor where the squat pan toilets will be installed.
Three
Wear your safety glasses and work gloves.
four
Remove the bathroom floor to accommodate parts of the toilet that are below the floor level.
Break the tiles or boards with a hammer. Cut the flooring with an electric knife.
five
Maintain the integrity of any board or tile removed.
Be careful not to damage it when removing it.
six
If necessary, use a hammer to break the wooden floor.
If you don’t have construction experience, get the services of a local professional before repairing parts of the house, such as bathroom toilets.
Finally, if you don’t have enough fittings for your new squat pan toilet, call a professional squat pan and plumber to help you prepare your bathroom for installation.

Squat pan Toilet space

Bathroom or toilet flushing space must be available before squat pan toilet installation.
In such a way that a room with dimensions of at least one meter and height of at least two meters with tiled walls up to two meters and a floor with insulation or isogram should be enclosed.
In this situation, the bathroom is prepared for the installation of squat pani toilets and the installation of squat pani toilets can be started.
Toilet stones come in different sizes. Thin stones are for simple and low-use bathrooms, while large stones are for general and high-use bathrooms.

Important points when installing a squat toilet bowl in the bathroom:
When installing the toilet bowl, you should pay attention to several points.
When the bathroom is big, you should not use small and shallow toilet bowls.
The toilet room should be big enough for a person to sit comfortably.
The floor of the bathroom should be level or slightly lower than the stone floor.
The toilet stone pipe should be placed at a suitable distance from the surrounding environment.
Therefore, before buying a toilet, check and measure your bathroom space to ensure a successful purchase, and then try different methods to properly install a squat pan toilet.

squat pan toilet mount

The squat pan toilet is one of those toilets that are installed on the floor.
Squat pan toilets are classified into two categories: closed pan squat and open pan squat toilets.
There is no difference in installing a rimless squat pan and a closed pan squat toilet.

A closed rim

It is a squat pan toilet design in which holes are drilled at predetermined intervals along the discharge channel, allowing water to enter the channel in a uniform, cascading fashion, completing the flushing process.
The bowl should be washed completely like the toilet stone, and all surfaces of the toilet stone should be washed as well.

This prevents dirt and insects from collecting in the bowl.

An open rim

These bowls contain two holes with a diameter of 10 or 12 mm so that the water transferred from the single flush can be drained and volume washing can be done through these two holes.
It has an open channel without regular holes around it, where the water flows quickly into the depths of the bowl after entering the drain channel.
Although the function and installation techniques of these two types of squat panny toilets are the same, they differ in several ways. Finally, pay attention to the slabs
Can not be differences

squat pan toilet methodology

For most Westerners, using a squatting toilet is a unique experience.
Those who live in countries where these toilets are not their personal favorite are unaware of the unusual shape, style and method of use.
Make sure the size of the squat pan toilet fits the dimensions of your bathroom. Some toilets are too small to sit comfortably, so people put their feet up as usual.
If the squat pan toilet is too small for you, spread your legs wider and place them on the floor outside the ceramic toilet.
Your feet should be as wide as your hips. Otherwise, the joints and spine They are under pressure.
After sitting, lean slightly forward and to the left with your weight.
To avoid stretching your knees and pressing your back into your lower back before defecating and urinating, shift your weight to the front half of your leg and keep your entire body weight on your left leg.
In this case, all waste will be emptied completely, simply and quickly, and you will feel relaxed.
In the end, try not to use the toilet for more than 4 minutes at a time to avoid continuous and long-term pressure on your muscles.

squatting pan toilet meaning

Due to the increase in the use of squat toilets in different nations, it is defined in different ways, while in general;
A squat toilet (also known as a squat toilet, Indian toilet, Turkish toilet, oriental toilet, and Asian toilet) is a toilet that allows you to squat instead of sit.
In other words, the voiding position is to kneel over the drain hole or toilet with one leg on each side.
Squat toilets come in many shapes and sizes, but they all have a flush or closet toilet.
Squat toilets are another name for these toilets.
Since a squat toilet has a seal, it can be a flush toilet or a dry toilet.
Squat toilets are used all over the world, although they are most commonly used in Asian and African countries, as well as some Islamic countries.

Flushing the anus with water is also a traditional concept in many of these countries and is easier to do than using a toilet seat.
They can also be seen in some European and South American countries in rare cases.
Many people consider the squat toilet to be traditional, however, it has been abandoned in favor of the low-impact or high-tech toilet seat.

squat pan toilet review

The type of toilet stone is the first thing to check.
Squat pan toilet stones are mainly made of sanitary porcelain.
However, there are many different types of porcelain.
The distinguishing feature of ceramic porcelain is the water absorption coefficient.
If there is too much water absorption, contaminants, bacteria and fungi will develop.
It also creates an unpleasant smell in the bathroom by collecting and depositing sewage.

Plating for squat pan toilets

Plating or glazing of toilet stones is very important.
Preferably, the glaze of the pan toilet is thick enough.
If the glaze is not suitable, the strength of the toilet stone will decrease and it will have a dull and unattractive appearance.
In addition, thin plating has little resistance to washing and water.

Design of the squat pan toilet

A very important thing to think about is the design of the squat panny toilet.
The back, knees and ankles of patients are significantly relieved by the ergonomic design of the squat toilet.
In addition, the proportion and size of the toilet bowl is important.
Depending on the size of your bathroom and other bathroom equipment, you should buy a squat panny toilet that is the right size for your toilet so that it is both easy to install and convenient to use.

Squat pan toilets come in a variety of shapes and sizes

There are different types of squat panny toilets that you can choose according to your needs.
1. Cover pan toilets with a closed rim or closed drain
Close-edged toilets are one of the most modern types of squat toilets.
The drain channel or edge is closed in this style.
However, there are fine holes of equal length and suitable along the channel.
The water is dispersed in a cascade in the toilet, and after entering the channel, it enters the channel and the surface of the toilet bowl is completely washed.
Closed-edge technology distributes water evenly throughout the toilet, allowing all parts to be thoroughly cleaned.
2. Is the squat pan toilet siphoned or flushed?
Closed rims are more common in older toilets, although this form is more convenient.
The channel in the open squat rim toilet does not have small and regular openings. Instead, the channel is open and when water flows into it, it cleans the toilet bowl from both sides with a relatively high intensity.

medical toilets

Medical floor toilets have all the same features and benefits as regular toilets.
With the difference that they are made in terms of ergonomics and have the best level of compatibility with the human body, as a result, the least pressure is applied to body parts such as legs, waist, etc.

A gentle and measured slope is created in medical toilets, which causes the weight of the person to be pushed forward when squatting, reducing the pressure on the spine and legs.
Due to their unique design, medical toilets are also healthier because the body has minimal contact with the toilet environment.

squat pan toilet parts

The squat pan toilet bowl consists of different parts.

Squat pan toilet stone

Squat pan toilets are mainly composed of sanitary ceramics and according to the material used, its prominence is different, and the first grade of the bowl is superior.
These first or third grade stones have a variety of glaze patterns, and in first grade stones, they have a more transparent glaze, and also the heating models during stone baking are complicated.
Among other distinctions of stones, it can be pointed out that the stone that is finally of higher quality, its strong glaze is more transparent and has very low water absorption.
To prevent stone breaking, the toilet must be made entirely of acceptable materials such as sand or sand.
The sand is softened to form a suitable base for the toilet bowl.
The steps of construction and installation as well as the various components of squat pan toilets may depend on the model and so on The way of the squat panny toilet is different, so pay special attention to these vital parts when buying a squat panny toilet.
Experienced and expert employees are employed in our company, as well as the development of skilled manpower, the acquisition of modern technical knowledge, the use of advanced technologies, the use of high-quality raw materials and advanced management systems, identifying the values ​​expected by customers and protecting the environment. All life has been used to serve customers in the best possible way.
It has also succeeded in reducing water consumption in the design of its products such as squat toilets.
By producing and supplying different products in terms of design, quality and performance, it has developed its markets in the national and international arena.

این مطلب چه‌ اندازه برایتان مفید بوده است؟

[kkstarratings]

Leave a Reply

Your email address will not be published. Required fields are marked *